Setting Up a Wired (Ethernet) Connection on PS4: Step-by-Step
Required Equipment
PS4 (any model)
Cat5e or Cat6 Ethernet cable (length to reach router)
Router/Modem with free LAN port
Active internet service
Steps
Plug cable into **PS4 LAN port** (rear, bottom right).
Plug other end into **Router LAN port**.
On PS4: Settings → Network → Set Up Internet Connection → Use a LAN Cable → Easy.
System tests connection. Confirm "Internet Connection: Successful".
Optional: **Test Internet Connection** again for speed/NAT type.
Optimization Tips
Cat6/Cat6a: Future-proofs for 2.5Gbps/10Gbps (PS4 Pro supports 1Gbps max).
Short Cable: <100ft (30m) to avoid signal loss.
QoS / Gaming Mode: Enable on router for traffic priority.
Static IP / DMZ: If NAT Type 2 (Strict), assign static IP in PS4 network settings + port forward (TCP: 80, 443, 1935, 3478-3480; UDP: 3478-3479) or place in DMZ (less secure).
Wired provides lower latency, zero packet loss from Wi-Fi interference, and stable Remote Play/Share Play.
