Connecting PSP-E1000 (Street) to Wi-Fi — No Physical Switch, Software Only

The PSP-E1000 (Street) has no physical Wi-Fi switch. Wi-Fi is toggled in software:

1. Settings → Network Settings → Infrastructure Mode → New Connection
2. Scan → Select SSID → Enter password (WPA2-PSK AES supported).
3. Save → Test Connection.

Note: E1000 only supports 802.11b (11 Mbps max). Modern routers must enable "Legacy 802.11b/g" or "Mixed" mode. Disable Wi-Fi 6 (802.11ax) if issues persist.

Update firmware via Settings → System Update → Update via Internet (requires connection) or PC/Media Go.